Campagnolo H11 Crank, 172mm, 52/36, Carbon

Campagnolo H11 Crank, 172mm, 52/36, Carbon
FC18-HP262C
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system.
Features:
  • Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor
  • Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain
  • USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings
  • Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings
  • Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss
  • Ultra-Torque system have both drive and non-drive side bearings pre-installed
  • Requires use of Ultra-Torque bottom bracket cups
Specs:
Spindle Interface TypeCampagnolo Ultra-Torque
Pedal Spindle9/16"
Defined ColorCarbon
Drivetrain Speeds11
ColorCarbon
Number of ChainringsDouble
Chainring BCD112 Campagnolo Asymmetric
Chainring BCD146 Campagnolo Asymmetric
BB IncludedNo
Chainline/Hub Compatibility135/142 Road Disc Hubs < 415 mm Chainstay
Crank Length (mm)172mm
Rings52/36
Weight603
Crank Intended UseRoad

This product was added to our catalog on April 25, 2018