SE Racing Perry Kramer PK Ripper 27.5" (High Polish Silver) (22.8" TopTube)

SE Racing Perry Kramer PK Ripper 27.5" (High Polish Silver) (22.8" TopTube)
Price: $999.00
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons

When the original PK Ripper burst onto the scene in 1979, it took the BMX world by storm & set a new benchmark for radness. Here we are now 40+ years later and it’s happening again with the new PK Ripper 27.5, designed by the man himself, the PK of “PK Ripper”, Perry Kramer. This ultra-cool bike features tubeless ready 27.5” x 2.5” Vee Speedster tires, sealed internal headset, internal cable routing, SRAM Level hydraulic disk brakes, Oakley B-1B grips, and of course Perry’s stamp of approval. This is the PK of the future! 


  • Perry Kramer replica 6061 aluminum PK Ripper frame w/ floval tubing, seatstays wrap, internal cable routing, and looptail rear end
  • Full Cr-Mo Landing Gear forks with disc tabs
  • SE Racing forged alloy 2-piece cranks with 24mm hollow alloy spindle, external sealed bearing bottom bracket and alloy chainring
  • SRAM Level hydraulic disc brakes with 2-piston caliper and SRAM Direct Link levers
  • Tubeless compatible Alex DP30 rims with Vee Speedster 27.5 x 2.5” tires, tubeless valves and tubeless rim tape included.
  • Oakley B-1B Grips with Perry Kramer Donuts
  • Perry Kramer Flyer Seat with SE bottle opener
  • SE Racing snap padset
  • Custom Perry Kramer PK Ripper sticker sheet
  • 31.1 pounds 

 6061 aluminum floval tubing, Internally-machined integrated head tube. Symmetrical looptail rear end, 142mm spaced dropouts, internal cable routing and disc brake tabs    
Fork: Landing Gear, full chromoly, 419mm Axle to Crown. 29mm offset, 110mm spaced dropouts
Headset: FSA Orbit CE, Sealed 1-1/8" integrated      
Stem: Retro Alloy Top-Load with engraved SE Logo on top and sides, 55mm Reach
Bars: Big Honkin' Chromoly Cruiser Bar, 29" x 7" x 12° Backsweep and 2° Upsweep
Grips: Oakley B-1B, Made in USA with PK donuts          
Cranks: SE 2-piece Forged Alloy 175mm, 24mm Hollow alloy spindle      
Bottom Bracket: 73mm External Sealed Euro Bottom Bracket    
Pedals: X-Pedo Low-profile platform with removable pins      
Chain: KMC S1 
Chainring: (39T) alloy
Wheelset: Alloy 36H Nutted hubs, Sealed Rear, 110mm Front Hub and 142mm Rear with Alex DP30 tubeless compatible double-wall disc rims, tubless rim tap and valves         
Driver: 17T Cassette                   
Spokes: Stainless Steel 
Tires: Vee Tire Co x SE Speedster, tubeless ready, folding, 72TPI 27.5" x 2.5" front and rear 
Seat: Perry Kramer SE Flyer seat with custom SE Bottle Opener Brace                   
Seat Post: Micro-Adjust, Alloy (27.2mm Diameter)
Seat Clamp: Promax Quick Release Seat Clamp, 31.8mm inner diameter       
Brakeset: SRAM Level, Hydraulic Disc, 2 Piston Caliper, 160mm Totor, Expandable Bladder, Timing Port Closure, DOT 5.1 Fluid           
Brake Lever: SRAM Direct Link Level, Alloy  
Extras: SE Bikes Snap Padset, Alloy Valve Caps, Custom PK Ripper 27.5 Sticker Sheet, SE Chain tensioner,
Weight: 33.1 lbs / 15.01 kgs

Frame Geometry:
Seatube Length: 15.7" 
Headtube Angle: 71°
Seattube Angle: 73°
Wheel Size: 27.5" 
BB Height: 11.9"
Standover: 29.5"          
Chainstays: 17.4"
Suggested Rider Size: 5'3" (160cm+)

Bike Check with Perry Kramer

Need help building your complete bike? Check out our bike build video below.

NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.