Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, Specialized has made it a reality. The Roval Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use.
First off, creaky straight-pull spokes and corrosion-prone alloy nipples were removed from the equation. Next up, 28 J-bend spokes were used for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, a new hub design was engineered, with a wider profile and higher flange to aid in overall stiffness.
What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, Specialized's engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal.
After determining the width, knowledge that was gained when developing the Control SL was integrated into the rim design. With this, Specialized started with the Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents.
Ok, so they're strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though "fattie" is in their name, they're far from fat. To achieve this weight, rims are hand-built to alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside the hubs, you'll find DT Swiss 240 internals that allow you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, professionally trained humans are used because they do so with an artistic touch that makes for minimal flaws.
Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
- 2Bliss Ready for tubeless setups
- Roval Engineered J-bend hub shells have a single spoke length for each wheelset
- Sealed cartridge bearings and a 2-cross lacing pattern provide a smooth and durable ride
Wheel Size: 27.5", 29"
ISO Diameter (ETRTO): 584, 622
Tire Type: Tubeless (Clincher)
Brake Type: Disc Brake (6-Bolt)
Hub: Specialized Alloy
Axle Type: Thru Axle
Hub Spacing: 15 x 110mm
Drive Type (Rear Hub): -
Rim: Traverse SL Fattie
Rim Width: 30mm (Inner), 35.7mm (Outer)
Spoke Count: 28H (264mm for 27.5", 282mm for 29")
Spoke Type: DT Swiss Competition Race J-Bend, DT Swiss Brass Pro Lock Hexagonal Nipples
Weight: 819g (27.5"), 846g (29")
- 19mm and 31mm OD end cap options
- 2 spare spokes and nipples
- 30 spoke plugs for the rim
- Tubeless rim tape preinstalled
This product was added to our catalog on June 25, 2021