The WeThePeople 2020 Versus BMX Bike is designed to shred skate parks utilizing components and geometry that mimics pro level exhibition winning bikes. The Versus is equipped with a gyro brake setup so that bar spins and tail whips can be done without worrying about brake cables binding. Every part on this bike is aftermarket grade being made by We The People, Salt, or Eclat meaning that strength and durability are top notch. The geometry of this model is intended to help at the park. Using a 20.65" top tube and a short 12.75" chainstay manuals and spins will come easily. The WTP Versus will extend your lines at the park with its gyro, geometry, and components.
Frame: Full 4130 Chromoly, Tapered Seatstay and Chainstay
Fork: Saltplus Versus, Full 4130 Chromoly, Butted Chromoly Steerer (26mm Offset)
Headset: Salt Pro Integrated Sealed
Stem: We The People Index Front Load (50mm Reach)
Bars: Saltplus Versus 2-Piece Full 4130 Chromoly
Grips: We The People Manta Thin Profile, Super Soft Compound
Cranks: Saltplus Ultra Square Profile 3-Piece "TSS", 4130 Chromoly, 8 Spline (170mm Length)
Bottom Bracket: Salt Mid Sealed (19mm)
Pedals: Eclat Contra Nylon/Fiberglass
Chain: We The People Supply Chain (Z510HX)
Sprocket: We The People Logic CNC Machined 6061-T6 Alloy (25T)
Front Hub: Saltplus Pro Alloy, Sealed Bearings, Female Bolts (3/8" Axle)
Rear Hub: Saltplus Pro Cassette, Fully Sealed Bearings (Hollow 14mm Axle)
Driver: 9T Sealed Bearings (Right Hand Drive)
Hubguards: Saltplus Pro Nylon/Fiberglass (2 Front) (1 Rear)
Front Rim: Saltplus Summit Double Wall (36mm Wide) (36h)
Rear Rim: Saltplus Summit Double Wall (36mm Wide) (36h)
Front Tire: Eclat Mirage (20 x 2.35")
Rear Tire: Eclat Mirage (20 x 2.35")
Seat: Eclat Unify (Slim Padded) (Combo)
Seat Post: Combo
Seat Clamp: Integrated
Lever: Salt Moto Alloy
Brakes: Saltplus Talon Alloy U-Brake
Gyro: Saltplus Geo CNC Alloy Rotor, Saltplus Dual Upper Cable
Brake Mounts: Removable Pivots and Guides
Gyro Tabs: Drilled
Extras: We The People Message 6061-T6 Alloy (2)
Color: Wizard Black
Weight: 26.39 lbs (with Brakes and Pegs)
Headtube Angle: 75.5°
Seattube Angle: 71°
Stand Over Height: 7.75"
BB Height: 11.55"
Sizing Guideline: 5' 1" - 6' Rider Height
Need help building your complete bike? Check out our bike build video below.
NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.
This product was added to our catalog on March 4, 2020