The 2021 We The People CRS BMX Bike was designed to give riders the most bang for their buck, while also making progression easier utilizing the bike's geometry. Short 12.75" chainstays and a fork with a 26mm offset create a snappy and quick feeling ride that is easy to pull the front wheel up. This means things such as bunny hopping, manuals, and 180's are all easier to learn and perfect. Fully sealed hubs and bearings, a 4130 chromoly downtube, and an extensive list of Salt and Eclat components tie this build together with the dependability of a mid-range priced bike, but without doing the same amount of damage to the wallet. The 2021 We The People CRS will take you to further heights in the world of freestyle BMX.
Frame: 4130 Chromoly Downtube, 1020 High-Tensile Steel
Fork: Salt AM 20, 1020 High-Tensile Steel, 4130 Chromoly Steerer (26mm Offset)
Headset: Salt Pro, Integrated Sealed Bearings
Stem: Salt Pro, Top Load (50mm Reach)
Bars: Salt CRS 20, 1020 High-Tensile Steel (8.85" Rise) (29" Wide) (11° Backsweep) (2° Upsweep)
Grips: Salt EX, Flangeless (154mm)
Cranks: Salt Rookie, Tubular 3-Piece, Chromoly, 8-Spline (165mm Length)
Bottom Bracket: Salt Mid, 19mm, Press-Fit, Sealed Bearing
Pedals: Eclat Surge, Nylon/Fiberglass
Sprocket: Salt Gateway, Steel (25-Tooth)
Chain: Salt AM, Z1 Type
Front Hub: Salt AM, Alloy, Sealed Bearings (3/8" Axle)
Rear Hub: Salt AM, Cassette, Sealed Bearings (14mm Axle)
Front Rim: Salt Fraction, Single Wall (36-Hole)
Rear Rim: Salt Fraction, Single Wall (36-Hole)
Front Tire: Salt Tracer (20" x 2.35")
Rear Tire: Salt Tracer (20" x 2.35")
Seat: Eclat Bios, Mid Padded, Pivotal Seat
Seat Post: Salt AM, Pivotal
Seat Clamp: Eclat Purge, 6061-T6 Forged Alloy
Brake Lever: Salt AM, Alloy
Brakes: SaltPlus Geo XL, Alloy U-Brake
Gyro Tabs: Drilled (Not Included)
Brake Mounts: Welded
Color: Galactic Purple
Weight: 26.76 lbs
Toptube Length: 20.25"
Chainstay Length: 12.75"
Headtube Angle: 75°
Seattube Angle: 71.5°
Bottom Bracket Height: 11.75"
Sizing Guideline: 53.5" - 62.6"
Need help building your complete bike? Check out our bike build video below.
NOTE: To ensure that every component on your bicycle is working properly, Dan's Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.
This product was added to our catalog on December 11, 2020