Manitou 15mm Shock Mount Hardware.
- 2 machined aluminum spacers (some kits may include a sleeve) for mounting 1 end of Manitou rear shocks (air or coil)
- Sold as a set of (2) spacers: (2) sets required per shock, (1) per each eyelet
- Sized by bolt diameter (M6/M8/M10) and frame mount ID width (in mm)
- This hardware is for 2011+ shocks with 15mm eyelets
|Bolt Size:||M6 or M8|
Remarks:Specifically for Santa Cruz, Blur frame: 3/8" (9.53mm) through hole with an 18mm width (bearing sleeve provided with frame: hardware only comes with width spacers)